Top tips for setting up a room for projector installation

A projector can be an integral part of a residential or commercial space and can fulfill many functions in both cases. Whether it is conducting meetings or presentations is concerned or entertaining your guests, a projector system can be the perfect device. But what is tricky here is the installation of the projector. No matter how well you install your Epson POWERLITE 1945W WXGA Projector and how good your installer is, you may still need to make a few settings in the room so as to ensure that the best picture quality and experience is guaranteed. The following are the top tips for setting up a room for projector installation:

Ceiling height

You may need to consider the ceiling height of the room in which you will be placing the projector so as to ensure that the system can be mounted high for a good quality.  Ceiling height controls the screen height and should be at least 3 feet high. The ceiling height minus 3 feet is the maximum screen height.

Clear out all the light

Another tip to keep in mind to set up a room for projector installation is to make sure the room has curtains or other means to block all the light coming from outside. A good visual experience is only possible if the room can be made dark and no lights fall on the projector screen.

Arrange the seating

To ensure that your audiences can have a good visual experience, you may need to make space for the seating. The sofas or chairs must be at a fair distance from the screen and must be comfortable. Depending upon the size of the room, the number of sofas or chairs can be decided and placed at the right angle.

Check the sound

Most projectors these days come with their inbuilt sound systems or speakers but if this is not the case with your projector then you can opt to additional speakers and place them around the room in the corners to enable your guests or audience to enjoy a good sound experience.

Close all the outside sound

Make sure that the room you are installing your projector in can shut down all the outside sound and noise. For a good visual experience it is important that the room is quiet and can be made absolutely without outside noise.  If possible, install sound blocking curtains or blinds to stop the sound from coming in.

Screen size must be right

Depending upon the size of the room, the size of the screen must be correct. Choose a size which does not crowd the room and does not look too large for the audience size.

Now that you know the points to keep in mind for setting up a room for projector installation A/V, you can start setting up yours after purchasing the right projector system from League Technologies. This is the best address for buying advanced projectors.